My 1st IKEA Hack

MY STORY

     If you have ever spent a minute on Instagram or Pinterest you know about IKEA hacks.  My husband and I are obsessed with the MOPPE mini storage box.  Very simple, well priced with a wealth of opportunities on how to use.

    I was looking for a new box for jewelry/make up and I decided this was my chance to delve into the IKEA hack world.  My inspiration was the Tiffany blue box, as nothing says jewelry or girly like Tiffany!

YOUR TURN

    For my example I used:

• MOPPE mini storage box from IKEA
• Krylon spray paint/primer in Blue Ocean Breeze (I googled "Tiffany Blue/Krylon" to come up with a perfect match)
• Krylon spray paint Clear Sealer
• Assorted doorknobs
• Assorted costume jewelry pins
• Disposable gloves
• E6000 glue
• Fabric
• Sandpaper
• Tin snips
• Tack Cloth

          File down any rough edges with fine grit sandpaper and clean up with a tack cloth.  With any spray painting, follow the manufacturer's instructions.  I applied about three coats of Krylon Paint+Primer in Blue Ocean Breeze to achieve the coverage I wanted.  

          Remove the drawers to paint separately.  As you will see why later, I painted the "back" of the drawer as opposed to the front with the finger pull.  

          Once all coats have dried, spray with the clear sealer -- I only used one coat of the sealer.

           Measure the inside of the drawers and cut your fabric accordingly.  You will end up with 6 pieces of interior fabric.

           STUDIO HINT:  When searching for fabric to use, find one that is machine washable.  I chose not to glue down so they would be easy to wash -- especially when using for a makeup box.  

           I wanted to have "glam doorknobs" so I selected some shiny silver ones as my base.  Measure carefully and screw in the knobs.  This is why I turned the drawers around when painting.  I thought using these as opposed to the finger pulls made it a little more dressy.

          When the doorknobs are secure, lay out different pins to see which ones you want to use.  I have been collecting pins since I was a kid, but EBAY has some great deals which is where I received this stash from.

           Using the tin snips, cut off the back of the pins so you are left with a flatter surface for adhering to the top of the knob.

           STUDIO HINT:  Cut the backs off over a garbage pail otherwise you will find little bits of pins next time you are walking around your craft area.  And you usually you will find them when you are barefoot.

           Cover the back of the pin, and a little bit of the knob, with the E6000 glue.  Hold in place for a few minutes to set up.

          

And my first IKEA hack is done!   Happy Crafting!

Playing With Gelli Pt 1

MY STORY

     I love adding new tools to my crafting arsenal and the gelatin printing plate from Gelli Arts is so addictive, I highly recommend it!  I've summarized some different techniques below and you can see that the possibilities are endless.  Stay tuned for the next blog to give you some ideas of how to create with the papers you have made.

YOUR TURN

Supplies used in these examples:

• Gelatin printing plates -- available in different sizes.  For a full list of products, how-to videos visit the Gelli Arts website CLICK HERE
• Various Acrylic paints -- colors up to you.  I like the line of Artists Loft paints found at Michaels
• Blank Canvas
• Plain paper ; vellum paper; watercolor paper -- they all have different effects
• Deli paper - 
  

     The deli paper is great for cleanups -- both from your brayer and if you want to remove some paint from your plate.  I found mine on Amazon -- 500 sheets for a very low cost.

• Paint brayers
• Rubber Stamps
• Stencils
• Household items -- I used charms I have -- anything that will leave a texture on the plate
• Sea sponge & texturizing tool

STUDIO HINT:  This can get messy.  You will need some room -- I have found it easiest to use the deli paper or waxed paper under your surface.  Keep baby wipes handy.  Also, you use very little paint on the plate.  When I first started I was putting way too much paint on.  It goes a long way.  When doing a printing "session" I keep using the same color palette so I don't have to constantly keep cleaning up.  And some paint always remains so you get some interesting results.  Once I finish, I keep my papers in files, sorted by color story, to make it easier when I want to use them.  Now, let's go....

WASHI TAPE:

     Washi tape is easily found and affordable.  It comes in all sorts of widths and colors -- the colors don't matter, you are only using them for the pattern -- they will leave a white spot on your print.

Studio Hint: When applying the tape, leave "tails" of the edges of the plate.  Will make it so much easier to remove when you are done.








STENCILS:

   Stencils are a great way to achieve texture.  They embed into the paint and the plate so when you lift off the paper you can get some great imagery.  And remember, each print is unique.

     I also applied a wash of just one color -- you still pick up some of the color which remains on the plate.  Press your paper down with the stencil on top of the plate.  Then remove the stencil and press another piece down.  You then get the negative effect -- which could be a cool look when used together in a future project.

CHARMS

     Any items you have around the house or in your stash can be used to create interesting images.  They will have to be fairly flat but here is what happens with gear charms and washers from the hardware store.  Also sometimes are use parts of the paper that I have already used.  With a similar color story, it makes some interesting effects. This is also an example of pulling a negative image and how they can complement each other:

RUBBER STAMPS

     There are a myriad of rubber stamps in the world -- I liked the effect of these decorative, deeply edged ones.  They are called out as fabric stamps, but worked perfectly in these examples:

If you apply too much paint, use the deli paper to "lift" away some of the color.

And you actually are left with a cool print

Remove some of the paint on the stamp on a piece of paper, it may come in handy

The stamps leave interesting impressions

Add more texture with this tool you easily find at hardware stores

CANVAS

     I was having fun utilizing different types of paper so I had an idea of using a canvas blank as the "paper".  In combination with a rubber stamp and the texture of the canvas, I love how this came out.  Lots of possibilities here!!

The canvas left quite a bit a paint on the plate so don't waste it, pull another print with paper

Printing on a page you have already used can add some interesting effects.

I also tried fabric ink on a baby onesie.  I think there is some potential here but the paint was a little too runny and not the best.  It came out kind of muddy on the onesie but I definitely think there could be something here in the future!

     This gelatin printing plate is so much fun to use -- you can even use regular copy paper.  Since you get so many prints out of a little paint you don't have to spend alot to get custom prints.  And you can use these prints in so many ways - cards, journaling pages, bookmarks.